Pressure Sensitive Adhesive
by
$129.99 PIECE
REG $150.00
Or
Specifications
Engineered for performance and flexibility, this pressure-sensitive adhesive delivers an unmatched 12-hour working window?three to six times longer than most competing adhesives. This extended open time allows for greater installation efficiency and ease, especially on larger or more complex jobs.Ideal for use on nonporous subfloors, this adhesive can be walked on immediately after application, though heavy loads should be avoided for the first 24 hours to ensure optimal bonding. It offers a 2-year shelf life when stored in a temperature-stable environment. Note: Do not use if the product has been frozen.Carpet Express also offers compatible trowels for purchase to streamline your installation process.
Carpet Express recommends a floorcovering professional to determine the amount of flooring you should purchase. Computer screen colors may vary from actual material. Please view actual samples to ensure your satisfaction.
| PRESSURE SENSITIVE ADHESIVE | |
| pH: | 7-12 |
| RH: | Up to 99% |
| Dry Time: | 30+ mins |
| Working Time: | 12 hrs |
| Cure Time: | 24 hrs |
| Foot Traffic: | Immediate Occupancy |
| Rolling Loads: | 24 hrs |
| REQUIRED APPLICATIONS & COVERAGE | |
| LVP, LVT, VCT, SVT, Modular Carpet Tile | |
| 1/16" x 1/32" x 1/32" U Notch | |
| Up to 260 sqft/gallon | |
| Homogeneous and Heterogenous Sheet Goods (porous substrate), double stick pad to substrate | |
| 1/16" x 1/16" x 1/16" Square Notch: | Up to 180 sqft/gallon |
| Resilient Sheet (fiberglass) and Carpet Tile | |
| 3/8? Short Nap Paint Roller: | Up to 360 sqft/gallon |
| 4 US Gallons (15.14 L) | |
| APPROVED FLOORING TYPES | |
| Luxury Vinyl Tile (LVT), Luxury Vinyl Plank (LVP), Modular Carpet Tile (Approved backings | |
| SUBSTRATE CONDITIONS | |
| Use on concrete substrates with up to 99% RH for flooring installed on or above grade (per ASTM F2170), and pH up to 12. | |
| Below grade installations are limited to 95% RH and 10 pH. | |
| For PVC modular carpet tile, RH is limited to 95% and pH up to 10. | |
| For Vinyl Sheet and Fiberglass Reinforced Sheet Flooring, RH is limited to 90% and pH up to 10. | |
| CLEANUP | |
| While wet, always apply soapy water to a clean cloth and wipe away adhesive. When material is dry, use denatured alcohol or appropriate adhesive remover. Do not pour directly onto flooring. | |
| STORAGE | |
| Store unopened between 50-80?F. Shelf life is 2 years unopened. Do not allow product to freeze. | |
| DISCLAIMER | |
| Users should determine suitability of this information or product for their own purpose or application. Manufacturer is not responsible for the misuse of this product. This adhesive is not a moisture barrier and should not be installed/treated as such. This adhesive is not a substrate moisture sealer and does not form a protective barrier and is only warranted to maintain an adhesive bond when used over substrates specified in this document. ASTM 2659 impedance readings that exceed 4% may void the warranty. Not a dangerous substance or mixture according to OSHA 29 CFR 1910. 1200. | |
| FIRST AID MEASURES | |
| Eye contact | |
| Skin contact | |
| Wash off immediately with plenty of water for at least 15 minutes. In the case of skin irritation or allergic reactions see a physician. | |
| Inhalation | |
| Remove victim to fresh air and keep at rest in a position comfortable for breathing. | |
| Ingestion | |
| Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Self-protection of the first aider | |
| INSTALLATIONS | |
| DISCLAIMER | |
| If unfamiliar with a product, always perform a bond test. Simply spread a small area of adhesive and install the desired floor covering into the adhesive to ensure the desired bond is achieved. *** | |
| After surface preparation, spread adhesive using recommended trowel or roller as needed for the specified flooring type. Dry - Set PSA (porous and non-porous substrate) | |
| Spread adhesive using required tools. | |
| After spreading the adhesive using the recommended trowel, wait 30-60 minutes for adhesive to flash off. When ready the adhesive will turn translucent and will not transfer to fingers/gloves. | |
| Working time | |
| 12 hours depending on ambient conditions and porosity of the substrate. | |
| Only apply as much adhesive as can be installed within a 12-hour period. Protect the adhesive from dust and debris, which will inhibit proper adhesive bond and decrease tack. Semi-Wet Set (sheeting adhesives only) | |
| After spreading the adhesive using the recommended trowel, wait 15-25 minutes for adhesive to flash off. | |
| Working time | |
| 20-30 minutes depending on ambient conditions and porosity of the substrate. | |
| After installation, roll flooring during the working time of the adhesive. | |
| For sheet goods | |
| Roll from the center towards the perimeter to allow expelling of trapped air. | |
| Check floor after 2 hours and roll again if necessary. | |
| *** Wait 4-8 hours before wet mopping, stripping, or finishing the floor *** NOTE | |
| Foot traffic may be permitted immediately when installing into dry adhesive. For installations into wet or semi-wet adhesive, allow 12 hours before traffic. | |
| PRECAUTIONARY NOTE | |
| THIS PRODUCT DOES NOT FORM A MOISTURE VAPOR BARRIER AND WILL NOT PROTECT FLOOR COVERING FROM HIGH MOISTURE AND PH | |
| DISPOSAL | |
| Dispose of in accordance with local, regional, national, and international regulations as specified. Read SDS for detailed instructions. SDS may be obtained by calling 1-800-255-3924. | |
| 24-HOUR EMERGENCY CONTACT Chemtrec (Transport/Environmental) | |
| 1-800-424-9300 or 1-703-527-3887 (Outside U.S.) | |
| Rocky Mountain Poison Center | |
| 1-866-767-5089 | |
| Features | |
| Green Label Plus | |
