Question: How do I know how much carpet I need?

-Scott
Dalton, Georgia

Answer: You usually need abut 10% more carpet, and about 5% more pad, than the actual square footage you are covering. However, the following steps are absolutely necessary in order to purchase the correct amount of carpet and pad needed for your job.

First, make a simple drawing of all the areas to be covered. Include, for example, living room, den, halls, master-bedroom, 2nd and 3rd bedrooms, and closets. Then measure each room in feet and inches, and add to sketch. Now you are ready to insert the carpet into the rooms.

Be sure you know the width of your carpet. Also, remember it is usually best for carpet in adjoining rooms to run the same direction. All carpet within the same room must run the same direction.

Installation can be a bit tricky, but if you take your time and actually draw out the carpet to be cut, and place the cuts in the appropriate room, it will make more sense to beginners. Be sure to save the waste from one room to use in another room or closet. Also, try to keep seams out of door ways.

Always remember to check your square footage to be covered against the amount of carpet your installer or dealer says you need. If it’s more than 10-15% extra, this should be a HUGE RED FLAG.

If you have any questions, or need help with your measurements, feel free to contact us at (800) 922-5582. We’ll be glad to help.

VN:F [1.9.22_1171]
Rating: 5.0/5 (2 votes cast)
VN:F [1.9.22_1171]
Rating: +2 (from 2 votes)
Ask the Experts: How much carpet do I need?, 5.0 out of 5 based on 2 ratings
You May Also Like
Shaw Tru Accents carpet
Read More

Shaw Tru Accents Collection

Shaw Tru Accents – Modern, Playful, and Bold Recently, Shaw released a new carpet collection called Tru Accents.…