0 items(s)
$0.00

Shopping Cart

    Your shopping bag is empty.

Flex-Tech Pressure Sensitive Vinyl Advesive

Our Price : $0.17 per sq ft
  $1.53 sq. yd. (sq yd. = 9 sq. ft.)
Sku : AC-IVC-FLEX-TECH
  • Add to Cart Add to Cart
Product Detail
  • Ivc
  • Flex-Tech one gallon adhesive is a clear set, solvent free, pressure sensitive adhesive made for the interior installation of IVC fiberglass sheet goods over approved substrates. This adhesive is formulated to be fast drying for quick installation. Flooring can be installed up to 24 hours after initial drying if the area remains dust and dirt free. FLEX-TECH is a solvent-free, low-odor adhesive that meets all Federal, State, and local government indoor air quality regulations.

USE OVER
FLEX-TECH can be used over the following -above, on, or below grade concrete in the absence of excessive moisture and alkalinity; wood underlayment (Wood underlayment panels must be underlayment grade as specified and warranted by the manufacturer.); VCT (well bonded); ceramic (well bonded); terrazzo (well bonded); self-leveling and patching compounds (Portland cement based only); resilient floor (no more than 2 layers, well bonded, non-cushioned); radiant heat floors (not exceeding 85?F). Moisture levels of concrete slabs must be 5 lbs. or less per 1000 square feet per 24 hours using an anhydrous calcium chloride test according to ASTM F-1869, and pH must be between 5 and 9; or, if using ASTM F-2170 In-Situ Probes should be less than 75% relative humidity.
Installation Note
Adhesive must be completely dry before laying flooring. Dry time will vary with fluctuations of temperature and humidity or porosity of the substrate. Adhesives applied over non-porous substrates require extended drying time.
FLOOR PREPARATION
Floor must be clean, smooth, flat and dry. Remove all foreign substances such as wax, grease, dirt and any substance or chemical that would interfere with a good bond. Fill all holes and cracks with a cement based patching compound. Sand high spots to eliminate the possibility of telegraphing. Prime floor if needed to prevent over absorption of adhesives, contain dust, to ensure a better bond of the adhesive to the subfloor, and over gypcrete subfloor with FLEX-PRIM Acrylic Latex Primer. The adhesive, floor covering, and area to receive resilient flooring must be maintained at a temperature of 65? to 95?F (18? to 35?C) and at a relative humidity of 30% to 60% for 72 hours before, during, and after installation. Follow IVC's guidelines regarding site conditions and installation.
RECOMMENDED APPLICATOR
A smooth surface paint roller up to a 3/16" nap is recommended. Coverage over porous substrates is up to 350 sq. ft./gal. Coverage over non-porous substrates is up to 400 sq. ft./gal.
NOTE
Coverage is approximate and may vary depending on porosity of substrate and the amount of adhesive applied.
INSTRUCTIONS
1. Apply adhesive with 3/8" short nap paint roller to approved substrate.
2. Allow adhesive to dry to the point where it will not transfer to the fingers when pressed.
3. Lay flooring according to IVC's recommendations. Adhesive will remain tacky up to 24 hours in a clean dust free environment.
4. Once flooring has been installed, start from the center of the floor to remove air from under material using a push broom (?broom method?). DO NOT USE ANY TYPE OF FLOORING ROLLER, I.E., 75 OR 100 POUND.
5. Use soap and water to clean up while adhesive is still wet. If dried, use an approved adhesive remover or stripper.
NOTE
Restrict heavy traffic on floor for 48 hours after installation.
PHYSICAL PROPERTIES
Base
Color
Off white
Consistency
Light paste
Open Time
Several hours
Shelf life
One year in unopened container at 70? F
Flammability
Non-flammable Meets NFPA Class A and UBC Class 1 as determined by ASTM E-84 and also passes the Pill Test.
Features
Solvent-free
Freeze/thaw stable to 10? F. While this adhesive is freeze/thaw stable, it is still necessary to protect from freezing. Multiple freeze/thaw cycles below 10? F may irreversibly damage the adhesive. Contains anti-microbial agents that will provide its dry film with protection from fungal growth. This protection is determined using the ASTM G21 test method.
Carpet Express recommends a floorcovering professional to determine the amount of flooring you should purchase. Computer screen colors may vary from actual material. Please view actual samples to ensure your satisfaction.

Buy from us with confidence knowing that your entire order will be handled right.

Carpet Express in Dalton GA

The Carpet Express showroom and distribution center is in Dalton GA. Our location enables us to offer prompt delivery and dependable service throughout the United States of America.

The shipping department at Carpet Express takes great pride in packing and shipping orders correctly. As a floorcovering dealer who regularly ships to individuals and dealers across the United States, we know the importance of proper packing and using the most dependable truck lines.

When placing an order online, the shipping charges will be added. We partner with multiple freight carriers to create a realtime shipping quote system. However, if you have any questions, your Carpet Express sales representative will provide you all the shipping details, including cost, approximate delivery time, and phone numbers for your local shipping terminal. Remember, you are responsible for unloading home deliveries. Many individuals have their installer pick up their order from the local terminal. This also saves a home delivery charge.

When shipping outside of Georgia, you will not be charged a sales tax. This will greatly offset shipping charges.

Approximate Terminal Delivery Schedule and Rates for Carpet

 
 
 
 
 
Delivery Time 2-4 days 4-6 days 5-7 days 5-8 days
Rate (per yard) $.40 - $1.00 $.70 - $1.50 $1.00 - $2.00 $1.25 - $2.25

shipping map

Home deliveries generally run $50-90 more than terminal rates. Please remember, you are responsible for unloading home deliveries.

IMPORTANT

When you or your installer picks your order up from the shipping terminal, or if you receive a home delivery, visually inspect the packages, rolls, etc. for damage. If damage is seen on your package, write on the shipping bill of lading that the shipment is damaged, and immediately call your Carpet Express sales representative. If damage is not discovered until the goods are opened at home, immediately call the truck line and Carpet Express to report the concealed damage. Also be sure the number of packages and rolls exactly match the bill of lading. If you have any questions, please call Carpet Express, because once you have signed the bill of lading, you are saying that all goods were received, and the packages and rolls were in good shape.

Look before you cut! Inspect your carpet and vinyl rolls for visible defects before you cut your flooring for installation. If visible defects can be seen, please call the Carpet Express claims department immediately, before you begin installation.

 

Be the first to Write a Review

Carpet Express has a perfect 5 star rating on TrustPilot!